FREE UK DELIVERY ON ORDERS OVER £50
RATED EXCELLENT BY OUR CUSTOMERS
100% SECURE ONLINE SHOPPING

PARRA No. 5584 Honey Badger Large Rifle Hard Case

A seriously tough constructed Hard Case for Firearms, with an IP67 Water and Dustproof Rating
  • £125.99
  • (FREE UK Delivery)
  • RRP £169.99
Item in Stock | Usually dispatched within 24 hours
Loading...

The Honey Badger Waterproof Hard Case is a seriously tough constructed Case with an IP67 Water and Dustproof Rating, that is ready to safely transport any kind of Airsoft Replica, Air Rifle, Shotgun, Rimfire or Centerfire Rifle. It has a thick layer of Pick and Pluck Foam so that the Case be perfectly customised to fit the contents, and is constructed (and rated) to be resistant to Impacts and Extreme Temperatures, and also has a Pressure relief valve that doesn't compromise the Waterproof seal inside.

Case
IP Rating67
Certificate IssuerIntertek
CertificatesWaterproof IP67-IEC60529 Edition 2.2 Clause 13.6 and Clause 14.2.7; Immersion MIL-STD-810 F Notice 3 Method 512.4; Impact Resistance Test - ATA300 Revision 8.0 B-2-5; Low Temperature IEC60068-2-1 Sixth Edition; High Temperature IEC60068-2-2 Fifth Edition
WaterproofYes
Dust ProofYes
Crush ProofYes
Shock ProofYes
Air ValveYes
Rubber SealYes
Minimum Temperature-40.00 °C
Maximum Temperature90.00 °C
PaddedYes
Padding MaterialSoft Foam
Case Padding TypeEgg Box Foam Lid Insert; Pick and Pluck Separator Foam x 2; Thin Base Separator Padding
Latch TypeDual Movement Claps
Latch Count6.00
Has HandlesYes
Handle TypeFolding Carry Handle; Large Folding Carry Handle
Has WheelsYes
Wheel Count2.00
Security FeaturesPadlock Holes
Weight7.89 Kg
Weight with Padding8.40 Kg
External Length138.70 cm
External Width39.40 cm
External Height16.50 cm
Corner Radius12.00 mm
Base Internal Depth8.80 cm
Base Internal Lower Length126.50 cm
Base Internal Lower Width27.80 cm
Base Internal Upper Length130.40 cm
Base Internal Upper Width31.60 cm
Lid Internal Depth5.30 cm
Lid Internal Lower Length129.90 cm
Lid Internal Lower Width31.00 cm
Lid Internal Upper Length131.00 cm
Lid Internal Upper Width31.80 cm

Delivery

Here at Factory Cases we ship to all across the UK! We provide a working day by road service via our handpicked courier services, simply buy your Hard Cases with us and we'll have them delivered directly from our warehouse to your door.

For more information on Deliveries please see our Delivery & Returns Information Page.

Returns

We want you to be absolutely happy with our products and services, so we provide the simple Factory Cases guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.

You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.

For more information on returning products, and how to do it please visit our Delivery & Returns Information Page.

Description

The Honey Badger Waterproof Hard Case is a generously sized Rifle Case made from very tough Polypropylene (PP) + Glass Fibre material which is the secret to its' Impact and Extreme Temperature resistant design. The external design of the Case is such that it is very easy to stack multiple Cases together, and a set of Integrated Wheels and Grab Handles makes them very easy to maneuver about. Inside the Case is multiple Pick and Pluck Foam layers, meaning you can cut out slots for your equipment to sit in, and stop them moving about in transit. The edge of the Case has a Rubber Seal that protects the contents from the ingress of Water (1m up to 30 minutes) and Dust. A Pressure-Relief Valve can also be found to control the internal Pressure of the Case without compromising the Waterproof Seal.

The case comes with multiple foam layers designed to keep you valuables safe and secure during movement. The lid of the case features egg shell foam to prevent the contents from sliding when closed, and a foam separator piece on the bottom of the case. The case also comes with two thick pick and pluck layers, allowing you to customise the shape of the foam to achieve the perfect fit around your precious valuables. The panel is cut and separated into cubes which can be pulled out to create the shape of the item you want to store inside, preventing the contents from sliding around inside the case and keeping them even more safe. Pick and Pluck foam is perfect for those who want to store lots of small items in once case without worry of them sliding into each other and causing damage, such as a large collection of Scopes and Magazines sat next to your Rifle.

The case is fully IP Rated and tested by a 3rd party quality assurance company to give you the confidence you need to put your trust in the case, tested for Waterproofing, Impact Resistance, Immersion, and Temperature Tests. The case is IP rated IP67, meaning that the case is fully dust tight and waterproof, making it great for transporting electronics as well as sights and scopes. The case can be submerged in water up to 1m for 30 mins meaning that you don't have to worry about rain or splashes during transport, and your equipment will come out as dry as when you put it in there. The case is tested for temperatures between -40°c and 90°c allowing the case to remain strong no matter the weather conditions.

The case features heavy duty clasps designed to keep the case secure, with six strong dual movement clasps which make the case easy to open, but give an extremely strong lock for transport. If you're worried about tampering the case also features two pad-lock holes, allowing for both standard padlocks to be used as well as TSA approved locks, allowing the case to be used for transport on Airlines. The case is secure enough to make it enough of a challenge for anyone trying to get a sneaky look inside.

The case also features an adjustable air valve which is designed to release pressure for transport by air, or in situations with high pressure such as at height. The valve is fully adjustable, but also water resistant, allowing you to adjust the amount of pressure allowed to equalise inside the case but without flooding the contents.

If you're looking for a Waterproof, Dustproof, Impact Proof, Extreme-Temperature-Proof Hard Case for your Firearms or Airsoft Replicas, that can be easily manuevered about and stored away, with the assurance that it is rated by a Third Party Quality Assurance Company (Intertek), then the Honey Badger Waterproof Hard Case should be top of your list.

Features

  • Perfect for Rifles and Shotguns
  • Ideal for the travelling shooter
  • Great for compact, long term storage
  • Eggshell foam lid insert
  • Two Pick and Pluck storage inserts
  • Base separator foam piece protection
  • Easily slides under beds, or fits in cupboards
  • IP Rated up to IP 67
  • Dust Tight Case to protect the contents
  • Protected against water submersion up to 1m for 30 mins
  • Rubber seal for an extra tight seal when closed
  • Secured using two single movement clasps
  • Folding low profile carry handle
  • Integrated Travel Wheels
  • Padlock holes for using a TSA lock or during storage
  • Reinforced where needed
  • Impact Resistant
  • Protects in low temperatures down to -40°c
  • Protects in high temperatures up to 90°c
  • Stainless steel hinge pins
  • Manual pressure air valve which resists water
  • Heavy Duty Polypropylene (PP) + Glass Fibre construction
  • Transport equipment with peace of mind

Package Includes

  • No. 5584 Honey Badger Waterproof Hard Case
  • Egg-shell foam lid insert
  • Foam Separator base insert
  • Two Pick-Pluck foam storage inserts
Case
IP Rating67
Certificate IssuerIntertek
CertificatesWaterproof IP67-IEC60529 Edition 2.2 Clause 13.6 and Clause 14.2.7; Immersion MIL-STD-810 F Notice 3 Method 512.4; Impact Resistance Test - ATA300 Revision 8.0 B-2-5; Low Temperature IEC60068-2-1 Sixth Edition; High Temperature IEC60068-2-2 Fifth Edition
WaterproofYes
Dust ProofYes
Crush ProofYes
Shock ProofYes
Air ValveYes
Rubber SealYes
Minimum Temperature-40.00 °C
Maximum Temperature90.00 °C
PaddedYes
Padding MaterialSoft Foam
Case Padding TypeEgg Box Foam Lid Insert; Pick and Pluck Separator Foam x 2; Thin Base Separator Padding
Latch TypeDual Movement Claps
Latch Count6.00
Has HandlesYes
Handle TypeFolding Carry Handle; Large Folding Carry Handle
Has WheelsYes
Wheel Count2.00
Security FeaturesPadlock Holes
Weight7.89 Kg
Weight with Padding8.40 Kg
External Length138.70 cm
External Width39.40 cm
External Height16.50 cm
Corner Radius12.00 mm
Base Internal Depth8.80 cm
Base Internal Lower Length126.50 cm
Base Internal Lower Width27.80 cm
Base Internal Upper Length130.40 cm
Base Internal Upper Width31.60 cm
Lid Internal Depth5.30 cm
Lid Internal Lower Length129.90 cm
Lid Internal Lower Width31.00 cm
Lid Internal Upper Length131.00 cm
Lid Internal Upper Width31.80 cm
Top