FREE UK DELIVERY ON ORDERS OVER £50
RATED EXCELLENT BY OUR CUSTOMERS
100% SECURE ONLINE SHOPPING

PARRA No. 329 Komodo Hard Case

The ideal transport/storage case for delicate or sensitive equipment
  • £18.99
  • (Delivery from £6.95)
  • RRP £24.99
Item in Stock | Usually dispatched within 24 hours
Loading...

The No. 329 Komodo Hard Case from PARRA is the ideal way to transport any delicate or sensitive equipment, electronic or otherwise, safe in the knowledge that they're completely protected from the elements. With an IP67 Waterproof rating, rubber seal to prevent ingress of Dust, Shock/Impact protection, as well as ratings to withstand extreme temperatures, this is the ultimate Hard Case for those who need to conveniently store or transport precious items.

Case
IP Rating67
Certificate IssuerIntertek
CertificatesWaterproof IP67-IEC60529 Edition 2.2 Clause 13.6 and Clause 14.2.7; Immersion MIL-STD-810 F Notice 3 Method 512.4; Impact Resistance Test - ATA300 Revision 8.0 B-2-5; Low Temperature IEC60068-2-1 Sixth Edition; High Temperature IEC60068-2-2 Fifth Edition
WaterproofYes
Dust ProofYes
Shock ProofYes
Air ValveYes
Rubber SealYes
Minimum Temperature-40.00 °C
Maximum Temperature90.00 °C
PaddedYes
Padding MaterialSoft Foam
Case Padding TypeEgg Box Foam Lid Insert; Pick & Pluck Foam; Thin Base Separator Padding
Latch TypeSingle Movement Clasp
Latch Count2.00
Has HandlesYes
Handle TypeFolding Carry Handle
Security FeaturesPadlock Holes
Weight1.00 Kg
External Length25.00 cm
External Width21.80 cm
External Height11.30 cm
Corner Radius3.50 mm
Base Internal Depth7.50 cm
Base Internal Lower Length22.00 cm
Base Internal Lower Width16.10 cm
Base Internal Upper Length22.00 cm
Base Internal Upper Width16.10 cm
Lid Internal Depth2.10 cm
Lid Internal Lower Length22.00 cm
Lid Internal Lower Width16.10 cm
Lid Internal Upper Length22.00 cm
Lid Internal Upper Width16.10 cm

Delivery

Here at Factory Cases we ship to all across the UK! We provide a working day by road service via our handpicked courier services, simply buy your Hard Cases with us and we'll have them delivered directly from our warehouse to your door.

For more information on Deliveries please see our Delivery & Returns Information Page.

Returns

We want you to be absolutely happy with our products and services, so we provide the simple Factory Cases guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.

You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.

For more information on returning products, and how to do it please visit our Delivery & Returns Information Page.

Description

PARRA Cases manufacture and supply a huge range of Protective Hard Cases that are third-party certified to protect from Water ingress up to 1m for 30 minutes, Dust, as well as Extreme Temperatures from -40°C to 90°C and Impact/Crush protection. The Komodo Hard Case is a medium-sized addition to the lineup perfect two fit a couple of Gopros in and offers a thick layer of Pick and Pluck foam inside, so that you can cut the case to your exact specification and keep your valuables in place and secure. The Polypropylene (PP) + Glass Fibre construction assures total protection from impacts, and a modular/stackable design allows you to neatly store your cases under beds, in cupboards, the boot of the car... wherever! The convenient folding Grab Handle makes it easy to carry on your person, and makes it extra compact when storing.

The Komodo Case comes with multiple foam layers designed to keep you valuables safe and secure during movement. The lid of the case features egg shell foam to prevent the contents from sliding when closed and a foam separator piece on the bottom of the case. The case also comes with a thick pick and pluck layer, allowing you to customise the shape of the foam to achieve the perfect fit around your precious valuables. The panel is cut and separated into cubes which can be pulled out to create the shape of the item you want to store inside, preventing the contents from sliding around inside the case and keeping them even more safe. Pick and Pluck foam is perfect for those who want to store lots of small items in once case without worry of them sliding into each other and causing damage, such as for a collection of electronics, External Hard Drives, Camera Equipment or a Drone with delicate blades for example.

The case is fully IP Rated and tested by a 3rd party quality assurance company to give you the confidence you need to put your trust in the case, tested for Waterproofing, Impact Resistance, Immersion, and Temperature Tests. The case is IP rated IP67, meaning that the case is fully dust tight and waterproof, making it great for transporting electronics as well as sights and scopes. The case can be submerged in water up to 1m for 30 mins meaning that you don't have to worry about rain or splashes during transport, and your equipment will come out as dry as when you put it in there. The case is tested for temperatures between -40°c and 90°c allowing the case to remain strong no matter the weather conditions.

The case features heavy duty clasps designed to keep the case secure, with two strong single movement clasps which make the case easy to open, but give an extremely strong lock for transport. If you're worried about tampering the case also features two pad-lock holes, allowing for both standard padlocks to be used as well as TSA approved locks, allowing the case to be used for transport on Airlines. The case is secure enough to make it enough of a challenge for anyone trying to get a sneaky look inside.

The case also features an adjustable air valve which is designed to release pressure for transport by air, or in situations with high pressure such as at height. The valve is fully adjustable, but also water resistant, allowing you to adjust the amount of pressure allowed to equalise inside the case but without flooding the contents.

No matter what you need to transport, if you want to do it conveniently, conserving as much space as possible, and with total protection from Extreme Temperatures, Dust, Water and Impacts, then the Komodo Hard Case from PARRA is the way to go.

Features

  • Ideal for Camera/Computer/Drone equipment
  • Suits a huge range of purposes
  • Compact sized Polypropylene (PP) + Glass Fibre hard case
  • Great for compact, long term storage
  • Eggshell foam lid insert
  • Two Pick and Pluck storage inserts
  • Base separator foam piece protection
  • Easily slides under beds, or fits in cupboards
  • IP Rated up to IP 67
  • Dust Tight Case to protect the contents
  • Protected against water submersion up to 1m for 30 mins
  • Rubber seal for an extra tight seal when closed
  • Secured using two single movement clasps
  • Folding low profile carry handle
  • Padlock holes for using a TSA lock or during storage
  • Reinforced where needed
  • Impact Resistant
  • Protects in low temperatures down to -40°c
  • Protects in high temperatures up to 90°c
  • Stainless steel hinge pins
  • Manual pressure air valve which resists water
  • Heavy Duty Polypropylene (PP) + Glass Fibre construction
  • Transport equipment with peace of mind

Package Includes

  • PARRA No. 329 Komodo Hard Case
  • Egg-shell foam lid insert
  • Foam Separator base insert
  • Pick-Pluck foam storage insert
Case
IP Rating67
Certificate IssuerIntertek
CertificatesWaterproof IP67-IEC60529 Edition 2.2 Clause 13.6 and Clause 14.2.7; Immersion MIL-STD-810 F Notice 3 Method 512.4; Impact Resistance Test - ATA300 Revision 8.0 B-2-5; Low Temperature IEC60068-2-1 Sixth Edition; High Temperature IEC60068-2-2 Fifth Edition
WaterproofYes
Dust ProofYes
Shock ProofYes
Air ValveYes
Rubber SealYes
Minimum Temperature-40.00 °C
Maximum Temperature90.00 °C
PaddedYes
Padding MaterialSoft Foam
Case Padding TypeEgg Box Foam Lid Insert; Pick & Pluck Foam; Thin Base Separator Padding
Latch TypeSingle Movement Clasp
Latch Count2.00
Has HandlesYes
Handle TypeFolding Carry Handle
Security FeaturesPadlock Holes
Weight1.00 Kg
External Length25.00 cm
External Width21.80 cm
External Height11.30 cm
Corner Radius3.50 mm
Base Internal Depth7.50 cm
Base Internal Lower Length22.00 cm
Base Internal Lower Width16.10 cm
Base Internal Upper Length22.00 cm
Base Internal Upper Width16.10 cm
Lid Internal Depth2.10 cm
Lid Internal Lower Length22.00 cm
Lid Internal Lower Width16.10 cm
Lid Internal Upper Length22.00 cm
Lid Internal Upper Width16.10 cm
Top