FREE UK DELIVERY ON ORDERS OVER £50
RATED EXCELLENT BY OUR CUSTOMERS
100% SECURE ONLINE SHOPPING

PARRA No. 2143 Python Hard Case

Medium sized Hard Case, rated to protect again Water, Dust, Impact and Temperature
  • £61.99
  • (FREE UK Delivery)
  • RRP £74.99
Item in Stock | Usually dispatched within 24 hours
Loading...

The Python Hard Case is a moderately sized Hard Case for the transport/storage of delicate or sensitive equipment. With an IP67 Waterproof Seal, Shock and Dustproof design and an Extreme Temperature Rating that protects the case between -40°C and 90°C, this is the ultimate way to keep your valuables safe on the move or in storage.

Case
IP Rating67
Certificate IssuerIntertek
CertificatesWaterproof IP67-IEC60529 Edition 2.2 Clause 13.6 and Clause 14.2.7; Immersion MIL-STD-810 F Notice 3 Method 512.4; Low Temperature IEC60068-2-1 Sixth Edition; High Temperature IEC60068-2-2 Fifth Edition; Impact Resistance Test - ATA300 Revision 8.0 B-2-5
WaterproofYes
Dust ProofYes
Shock ProofYes
Air ValveYes
Rubber SealYes
Minimum Temperature-40.00 °C
Maximum Temperature90.00 °C
PaddedYes
Padding MaterialSoft Foam
Case Padding TypeEgg Box Foam Lid Insert; Pick and Pluck Separator Foam x 3; Thin Base Separator Padding
Latch TypeDual Movement Claps
Latch Count2.00
Has HandlesYes
Handle TypeFolding Carry Handle
Has WheelsNo
Security FeaturesPadlock Holes
Weight2.94 Kg
Weight with Padding3.20 Kg
External Length41.00 cm
External Width27.50 cm
External Height29.50 cm
Corner Radius9.82 mm
Base Internal Depth18.00 cm
Base Internal Lower Length36.00 cm
Base Internal Lower Width20.30 cm
Base Internal Upper Length38.20 cm
Base Internal Upper Width23.00 cm
Lid Internal Depth6.85 cm
Lid Internal Lower Length36.20 cm
Lid Internal Lower Width20.70 cm
Lid Internal Upper Length38.40 cm
Lid Internal Upper Width22.90 cm

Delivery

Here at Factory Cases we ship to all across the UK! We provide a working day by road service via our handpicked courier services, simply buy your Hard Cases with us and we'll have them delivered directly from our warehouse to your door.

For more information on Deliveries please see our Delivery & Returns Information Page.

Returns

We want you to be absolutely happy with our products and services, so we provide the simple Factory Cases guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.

You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.

For more information on returning products, and how to do it please visit our Delivery & Returns Information Page.

Description

PARRA Cases presents the Python Hard Case, a moderately sized travel/storage box that is ideally shaped/sized to contain a huge array of equipment from Camera Lenses/Accessories to Drone, Optical and Night Vision Equipment. The case has generous overall dimensions but is still easy to carry on your person thanks to the Grab Handle, or to put in storage in cupboards, under beds and in the boot of the Car. The strength of the Python Case is made possible thanks to its Polypropylene (PP) + Glass Fibre construction and reinforced sections, giving it the durability it needs in all the right places, and a rubber seal which protects the contents from dust and liquids. The handle of the case can be folded away to make it even more compact in storage, and the hinges are supported by Stainless Steel pins to ensure long-life performance.

The case comes with multiple foam layers designed to keep you valuables safe and secure during movement. The lid of the case features egg shell foam to prevent the contents from sliding when closed, and a foam separator piece on the bottom of the case. The case also comes with four thick pick and pluck layers, allowing you to customise the shape of the foam to achieve the perfect fit around your precious valuables. The panel is cut and separated into cubes which can be pulled out to create the shape of the item you want to store inside, preventing the contents from sliding around inside the case and keeping them even more safe. Pick and Pluck foam is perfect for those who want to store lots of small items in once case without worry of them sliding into each other and causing damage, such as for a collection of Riflescopes, or a Drone with delicate blades for example.

The case is fully IP Rated and tested by a 3rd party quality assurance company to give you the confidence you need to put your trust in the case, tested for Waterproofing, Impact Resistance, Immersion, and Temperature Tests. The case is IP rated IP67, meaning that the case is fully dust tight and waterproof, making it great for transporting electronics as well as sights and scopes. The case can be submerged in water up to 1m for 30 mins meaning that you don't have to worry about rain or splashes during transport, and your equipment will come out as dry as when you put it in there. The case is tested for temperatures between -40°c and 90°c allowing the case to remain strong no matter the weather conditions.

The case features heavy duty clasps designed to keep the case secure, with two strong dual movement clasps which make the case easy to open, but give an extremely strong lock for transport. If you're worried about tampering the case also features two pad-lock holes, allowing for both standard padlocks to be used as well as TSA approved locks, allowing the case to be used for transport on Airlines. The case is secure enough to make it enough of a challenge for anyone trying to get a sneaky look inside.

The case also features an adjustable air valve which is designed to release pressure for transport by air, or in situations with high pressure such as at height. The valve is fully adjustable, but also water resistant, allowing you to adjust the amount of pressure allowed to equalise inside the case but without flooding the contents.

If you regularly travel and need to transport larger equipment such as entire cameras, several Hard Disks or any kind of expensive components that you want to be assured is safe from extreme temperatures, submersion in water, dust, shock, impacts and even the pesky folks at the Transport Safety Authority, then the PARRA Python Hard Case is perfect.

Features

  • Perfect for Cameras/Drones/Riflescopes
  • Great for compact, long term storage
  • Eggshell foam lid insert
  • Four Pick and Pluck storage inserts
  • Base separator foam piece protection
  • Easily slides under beds, or fits in cupboards
  • IP Rated up to IP 67
  • Dust Tight Case to protect the contents
  • Protected against water submersion up to 1m for 30 mins
  • Rubber seal for an extra tight seal when closed
  • Secured using two dual movement clasps
  • Folding low profile carry handle
  • Padlock holes for using a TSA lock or during storage
  • Reinforced where needed
  • Impact Resistant
  • Protects in low temperatures down to -40°c
  • Protects in high temperatures up to 90°c
  • Stainless steel hinge pins
  • Manual pressure air valve which resists water
  • Heavy Duty Polypropylene (PP) + Glass Fibre construction
  • Transport equipment with peace of mind

Package Includes

  • PARRA No. 2143 Python Hard Case
  • Egg-shell foam lid insert
  • Foam Separator base insert
  • Four Pick-Pluck foam storage inserts
Case
IP Rating67
Certificate IssuerIntertek
CertificatesWaterproof IP67-IEC60529 Edition 2.2 Clause 13.6 and Clause 14.2.7; Immersion MIL-STD-810 F Notice 3 Method 512.4; Low Temperature IEC60068-2-1 Sixth Edition; High Temperature IEC60068-2-2 Fifth Edition; Impact Resistance Test - ATA300 Revision 8.0 B-2-5
WaterproofYes
Dust ProofYes
Shock ProofYes
Air ValveYes
Rubber SealYes
Minimum Temperature-40.00 °C
Maximum Temperature90.00 °C
PaddedYes
Padding MaterialSoft Foam
Case Padding TypeEgg Box Foam Lid Insert; Pick and Pluck Separator Foam x 3; Thin Base Separator Padding
Latch TypeDual Movement Claps
Latch Count2.00
Has HandlesYes
Handle TypeFolding Carry Handle
Has WheelsNo
Security FeaturesPadlock Holes
Weight2.94 Kg
Weight with Padding3.20 Kg
External Length41.00 cm
External Width27.50 cm
External Height29.50 cm
Corner Radius9.82 mm
Base Internal Depth18.00 cm
Base Internal Lower Length36.00 cm
Base Internal Lower Width20.30 cm
Base Internal Upper Length38.20 cm
Base Internal Upper Width23.00 cm
Lid Internal Depth6.85 cm
Lid Internal Lower Length36.20 cm
Lid Internal Lower Width20.70 cm
Lid Internal Upper Length38.40 cm
Lid Internal Upper Width22.90 cm
Top